1.capacity 5t/h
2.raw material wood chips
JLNE pellet plant in Singapore contains these:
Crushing process
Hammer mill:The hammer mill is a machine whose purpose is to crush materials by the collision between the high-speed hammer and materials. Our SFSP series crushing machine is your best choice.During wood pellet plant it mill raw material like tree branch, wood shavings, wood chips, wood logs, cotton stalk, corn stalk, wheat straw etc, with size less than 50mm (diameter). After milled, the output size can reach diameter 3-5 mm, then it is pushed to next process to get dried and pelletized.
Drying process
Rotary Dryer:After crushing process, the wood and biomass material need to be well conditioned on moisture before pelletizing. The best moisture content to pelletizing is about 14-16%. Our rotary dryer is made up of burning stove and main rotary dryer which is high efficiency in drying the wood and biomass material.It is very important for wood pellet making line.
Pelletizing process
Wood pellet machine:Ring Die Pellet machine is the heart of the wood pellet plant. The Pellet machine is widely used in compacting of wood, straw, other biomass sources into pellet. Capacity ranges from 1T to 10T per hour. Our MZLH series pellet machine adopt imported bearings from Sweden or from Japan, high quality components make the pellet machine more efficient and durable.  
Cooling process
Pellet cooling machine:After the pelletizing process, the temperature of the wood pellet is about 60-80 degrees Celsius, and the moisture content of the wood pellets is about 15%. In a wood pellet making line the cooler must then be used to reduce the moisture content of the wood pellet to about 3-4%, thereby making the wood pellet easy to store. However, some customers said that the local climate is very humidity, they want to cool the wood pellets with moisture 7-8%. It is no problem, our new stabilizer combined cooler can do it well. Packing process
Pellet packing machine After cooling process, the wood pellets will not directly enter into the fuel process, avoiding the wood pellet affected with damp, the packing process is very necessary. The packing process is effectively handled by our Semi-Auto Packing Machine.
Transmission  conveyors
the belt conveyor & screw conveyor & bucket elevator & other type will be adopted among the wood pellet making line.
Electric control system
2 options :All the process of wood pellet making line will be controlled and monitored by our advanced computer controlling system. The control center is collected in accordance with the actual value and the current settings for contrast, which will ensure the stability of the whole processing in order to give full play to the pellet plant production capacity and to prevent plugging
Optional equipments
Dust collector :collect dust during wood pellet plant working,to make workshop clean.
Magnet:mainly used on crushing steps to seperate impurities.